M18 Fuel 1/2″ Mid-Torque Impact Wrench w/ Pin Detent (Bare Tool Only)

Description

Overview
Milwaukee’s M18 FUEL 1/2″ Mid-Torque Impact Wrench w/ Pin Detent delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATEâ„?Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This MILWAUKEE® 1/2″ Impact Wrench is the most compact in its class, giving you access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROLâ„?offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFFâ„?control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers you full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUSâ„?Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18â„?REDLITHIUMâ„?battery pack (not included) fits M18â„?tools, delivering more work per charge and more work over the life of the pack.

Includes
(1)M18 FUEL 1/2″ Mid-Torque Impact Wrench w/ Pin Detent(2962P-20)

Product Features
Pin detent locks sockets in place securely, especially while working overhead
6.0″ in length provides most access in tight spaces
The POWERSTATE brushless motor delivers up to 550 ft-lbs. of max fastening torque
Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
4-Mode DRIVE CONTROL provides greater control over output speed and power. Includes auto shut-off and bolt-removal control
AUTO SHUT-OFF control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening
Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
Mode 1 RPMs: 0-1,250; Mode 2 RPMs: 0-1,950; Mode 3 RPMs: 0-2,575; Mode 4 RPMs: 0-2,575
Mode 1 IPMs: 0-900; Mode 2 IPMs: 0-2,100; Mode 3 IPMs: 0-3,100; Mode 4 IPMs: 0-3,100
REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
Works in up to to 69kV environments
Compatible with all M18 batteries & Chargers

Product Specifications
Height: 8.12″
Length: 6″
Weight: 3.5 lbs
Width: 2.74″
Power Source: Cordless
Nut Busting Torque: 650 (ft-lbs)
Fastening Torque: 550 (ft-lbs)
Anvil Type: 1/2″ Square w/ Friction Ring